NS0-164 Dumps are Available for Instant Access [2026]
Practice with these NS0-164 dumps Certification Sample Questions
NEW QUESTION # 91
Which OSSV package would you use to perform an OSSV unattended installation?
- A. svunattendossv
- B. svconfigpackager
- C. unattendpackager
- D. None of the above
Answer: B
NEW QUESTION # 92
Which one of the following statements is not true when using SnapRestore?
- A. The volume to be reverted must not be a SnapMirror destination mirror.
- B. SnapRestore must be licensed before you can use it.
- C. The options snaprestore <vol_path_name> enable on option must be enabled.
- D. The volume must be online.
Answer: C
NEW QUESTION # 93
Which two statements accurately describe the data protection features that are integrated into ONTAP?
(Choose two).
- A. MetroCluster technology enables asynchronous replication of data between two NetApp storage clusters that are located at separate sites.
- B. SnapMirror Business Continuity provides real-time data mirroring for high-availability scenarios.
- C. With SnapMirror software, changes that are made to the primary storage system are periodically replicated to the secondary system.
- D. ONTAP S3 provides replication capabilities between ONTAP and object storage in the cloud.
Answer: B,C
NEW QUESTION # 94
After configuring an ONTAP duster for SAN access, the administrator is notified that the cluster nodes are connected to separate fc switches.
Given the following output:
What action will correct the redundancy issue?
- A. swap cable at node-01 / lc with cable at node-02 / lc
- B. swap cable at node-01 / la with cable at node-01 / Id
- C. swap cable at node-01 / lb with cable at node-02 / lb
- D. swap cable at node-01 / Id with cable at node-02 / Id
Answer: D
NEW QUESTION # 95
For DOT 7.3 and higher, which is true about SnapVault or Open Systems SnapVault and deduplication?
- A. Deduplication is not supported with SnapVault/ Open Systems SnapVault.
- B. A deduplication schedule can be enabled for SnapVault secondary systems.
- C. When enabled on the secondary system, deduplication runs after each SnapVault / Open Systems SnapVault transfer.
- D. Deduplication is recommended for SnapVault primary systems because it replicates data in a deduplicated state
Answer: C
NEW QUESTION # 96
Match the storage efficiency terms with their corresponding functions. (Thin Provisioning, Deduplication, Compression, Replication, Tiering)
- A. Thin: Disaster recovery. Dedupe: Capacity on demand. Compression: Remove duplicate blocks.
Replication: Migration. Tiering: Reduce size. - B. Thin: Reduce size. Dedupe: Migration. Compression: Disaster recovery. Replication: Capacity on demand. Tiering: Remove duplicate blocks.
- C. Thin: Capacity on demand. Dedupe: Remove duplicate blocks. Compression: Reduce size. Replication:
Disaster recovery. Tiering: Migration based on usage.
Answer: C
NEW QUESTION # 97
Exhibit.
An administrator has a NetApp AFF cluster with Cloud Tiering enabled on all data using the snapshot-only policy. When restoring files, users report slow response times.
What is the highest latency seen during restore?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 98
Which zoning method does NetApp recommend?
- A. single-initiator worldwide node name (WWNN) zoning.
- B. single-target worldwide port name (WWPN) zoning.
- C. single-target worldwide node name (WWNN) zoning.
- D. single-initiator, multiple target, worldwide port name (WWPN) zoning.
Answer: D
NEW QUESTION # 99
Which two data compression method does NetApp ONTAP provide? (Choose two).
- A. postprocess.
- B. external.
- C. inline.
- D. incremental.
Answer: A,C
NEW QUESTION # 100
An aggregate is composed of twelve 36-Gigabyte disks. A drive fails and only 72-Gigabyte spare disks are available Data ONTAP will then perform what action?
- A. chooses a 72-Gigabyte disk and right-size it
- B. chooses a 72-Gigabyte disk and use it as is
- C. halts after 24 hours of running in degraded mode
- D. alerts you that there are no 36-Gigabyte disks and wait for one to be inserted
Answer: A
NEW QUESTION # 101
The two copies of a SyncMirror volume are called_______. Each______is a physical copy of the same file system and consists of one or more RAID groups.
- A. volumes, volume
- B. snapshots, snapshot
- C. qtrees. qtree
- D. plexes. plex
Answer: D
NEW QUESTION # 102
Which one of the following commands would you use to rejoin the "mil" volume with the "mir(l)" volume?
- A. vol mirror mir -c mir(l)
- B. vol mirror mir -v mir
- C. vol minor mil -n mir(l)
- D. vol mirror mil -v mir(l)
Answer: D
NEW QUESTION # 103
Which one of the following keywords alone can be used to convert an asynchronous mirror to be synchornous?
- A. outstanding
- B. src_con
- C. sync
- D. cksum
Answer: C
NEW QUESTION # 104
One method of configuring an interface for takeover is to enter ifconfig interface partner address at the command line. To make tins configuration persistent across reboots, you must enter tins information in the_____file for each appliance.
- A. /vol/volO/mount
- B. /voL'volO/home
- C. /etc/rc
- D. /etc/hosts
Answer: C
NEW QUESTION # 105
For each Open Systems platform directory to be backed up to the SnapVault secondary storage system, you must execute _____ from the primary to secondary storage system.
- A. an incremental copy
- B. a temporary copy
- C. an initial baseline copy
- D. a scheduled update copy
Answer: C
NEW QUESTION # 106
Which one of the following statements apply to Advanced Single Instance Storage (ASIS)?
- A. Eliminates duplicates files in SnapVaultfor NetBackup source volumes Correct answers
- B. Eliminates duplicates blocks in SnapVault for NetBackup secondary volumes
- C. Eliminates duplicates files in SnapVault for NetBackup secondary volumes
- D. Eliminates duplicates blocks in SnapVaultfor NetBackup source volumes
Answer: B
NEW QUESTION # 107
Which command parameter will result in a thin-provisioned LUN?
- A. -space-reservation disabled
- B. -space-guarancea none
- C. -space-allocation enabled
- D. -space-guarantee volume
Answer: A
NEW QUESTION # 108
Exhibit:
To remove a cluster setup, you must perform the steps displayed in the exhibit.
- A. True
- B. False
Answer: A
NEW QUESTION # 109
Which pair of components is a major part of data storage VMs?
- A. aggregates and network ports.
- B. data LIFs and aggregates.
- C. disks and nodes.
- D. volumes and data LIFs.
Answer: D
NEW QUESTION # 110
What are three functions of SnapMirror Asynchronous? (Choose three).
- A. periodically create NetApp Snapshot copies of data on one volume.
- B. copy the Snapshot copies to a destination volume, usually on another cluster.
- C. provide quick availability and restore operation of data from the time of the latest Snapshot copy.
- D. provide synchronous disaster recovery.
Answer: A,B,C
NEW QUESTION # 111
Which two tools should an administrator use to manage NVMe namespaces? (Choose two.)
- A. SAN Host Tools
- B. ONTAP CLI
- C. System Manager
- D. Config Advisor
Answer: B,C
NEW QUESTION # 112
What needs to be enabled on an ONTAP SMB share to increase data throughput and fault tolerance for Microsoft SQL Server databases?
- A. Multipathing
- B. Multi-channel
- C. Initiator group
- D. Round-robin
Answer: B
NEW QUESTION # 113
Which two tools can be used to actively monitor ONTAP cluster performance? (Choose two.)
- A. Active IQ Unified Manager
- B. Active IQ OneCollect
- C. Cloud Insights
- D. Cloud Sync
Answer: A,C
NEW QUESTION # 114
When using link aggregation, which interface group mode is recommended?
- A. single-mode.
- B. double-mode.
- C. dynamic multimode.
- D. static multimode.
Answer: C
NEW QUESTION # 115
......
Get Instant Access REAL NS0-164 DUMP Pass Your Exam Easily: https://www.test4sure.com/NS0-164-pass4sure-vce.html
NS0-164 Free Exam Questions with Quality Guaranteed: https://drive.google.com/open?id=17Y4UAWZ1ayuV4oes48B8ZhHClPAdDgri