100% Free 300-620 Files For passing the exam Quickly UPDATED Jul 25, 2023
300-620 Dumps Questions Study Exam Guide
The 300-620 exam covers a range of topics, including ACI architecture, fabric infrastructure, policies, automation, and troubleshooting. Candidates are expected to have a deep understanding of these concepts and be able to apply them in real-world scenarios. 300-620 exam consists of multiple-choice questions and simulation exercises that require candidates to demonstrate their proficiency in using ACI tools and techniques.
NEW QUESTION # 73
Drag and drop the Cisco ACI filter entry options from the left onto the correct categories on the right indicating what are required or optional parameters.
Answer:
Explanation:
NEW QUESTION # 74
Refer to the exhibit.
Which Adjacency Type value should be set when the client endpoint and the service node interface are in a different subnet?
- A. L3
- B. Unicast
- C. Routed
- D. L3Out
Answer: C
NEW QUESTION # 75
An engineer is extending an EPG out of the ACI fabric using static path binding. Which statement about the endpoints is true?
- A. External endpoints are in a different bridge domain than the endpoints in the fabric.
- B. Endpoint learning encompasses the MAC address only.
- C. Endpoints must connect directly to the ACI leaf port.
- D. External endpoints are in the same EPG as the directly attached endpoints.
Answer: B
Explanation:
Section: ACI Packet Forwarding
NEW QUESTION # 76
An engineer wants to filter the System Faults page and view only the active faults that are present in the Cisco ACI fabric. Which two lifecycle stages must be selected for filtering? (Choose two.)
- A. Raised, Clearing
- B. Soaking, Clearing
- C. Retaining
- D. Soaking
- E. Raised
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/faults/guide/b_APIC_Faults_Errors/ b_IFC_Faults_Errors_chapter_01.html
NEW QUESTION # 77
A customer implements RBAC on a Cisco APIC using a Windows RADIUS server that is configured with network control policies. The APIC is as follows:
Tenant = TenantX
Security Domain = Tenantx-SD
User = X
The customer requires User X to have access to TenantX only, without any extra privilege in the Cisco ACI fabric domain. Which Cisco AV pair must be implemented on the RADIUS server to meet these requirement?
- A. shell:domains = TenantX-SD/fabric-admin/,common//read-all
- B. shell:domains = TenantX-SD/tenant-admin/,common//read-all
- C. shell:domains = TenantX-SD/tenant-ext-admin/,common//read-all
- D. shell:domains = TenantX-SD/tenant-admin
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/Security_config/b_Cisco_APIC_Security_Guide/b_Cisco_APIC_Security_Guide_chapter_0100.html
NEW QUESTION # 78
Refer to the exhibit.
Which two objects are created as a result of the configuration? (Choose two.)
- A. attachable AEP
- B. VRF
- C. endpoint group
- D. application profile
- E. bridge domain
Answer: B,E
NEW QUESTION # 79
An engineer is extending EPG connectivity to an external network. The external network houses the Layer 3 gateway and other end hosts. Which ACI bridge domain configuration should be used?
- A. Forwarding: Custom
L2 Unknown Unicast: Hardware Proxy L3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Disabled - B. Forwarding: Custom
L2 Unknown Unicast: Flood
L3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Disabled - C. Forwarding: Custom
L2 Unknown Unicast: Hardware Proxy L3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Enabled - D. Forwarding: Custom
L2 Unknown Unicast: Flood
L3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Enabled
Answer: D
NEW QUESTION # 80
An engineer is configuring ACI VMM domain integration with Cisco UCS-B Series. Which type of port channel policy must be configured in the vSwitch policy?
- A. LACP Active
- B. LACP Passive
- C. MAC Pinning
- D. MAC Pinning-Physical-NIC-load
Answer: C
NEW QUESTION # 81
Refer to the exhibit.
Which two components should be configured as route reflectors in the ACI fabric? (Choose two.)
- A. apic1
- B. Leaf1
- C. apic2
- D. Spine1
- E. Spine2
- F. Leaf2
Answer: D,E
NEW QUESTION # 82
Drag and drop the Cisco ACI filter entry options from the left onto the correct categories on the right indicating what are required or optional parameters.
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/ b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.html
NEW QUESTION # 83
Refer to the exhibit.
A systems engineer is implementing the Cisco ACI fabric. However, the Server2 information is missing from the Leaf 101 endpoint table and the COOP database of the spine. The requirement is for the bridge domain configuration to enforce the ACI fabric to forward the unicast packets generated by Server1 destined to Server2. Which action must be taken to meet these requirements?
- A. Enable ARP Flooding
- B. Enable Unicast Routing
- C. Set L2 Unknown Unicast to Flood
- D. Set IP Data-Plane Learning to No
Answer: C
NEW QUESTION # 84
Refer to the exhibit.
An engineer is implementing Cisco ACI - VMware vCenter integration for a blade server that lacks support of bonding. Which port channel mode results in "route based on originating virtual port" on the VMware VDS?
- A. LACP Active
- B. LACP Passive
- C. MAC Pinning+
- D. Static Channel - Mode On
- E. MAC Pinning-Physical-NIC-load
Answer: C
NEW QUESTION # 85
Which two statements regarding ACI Multi-Site are true? (Choose two.)
- A. ACI Multi-Site is a solution that allows one APIC cluster to manage multiple ACI sites.
- B. The Multi-Site orchestrator must be directly attached to one ACI leaf.
- C. The Inter-Site network routers should run OSPF to establish peering with the spines.
- D. ACI Multi-Site is a solution that supports a dedicated APIC cluster per site.
- E. Routers in the Inter-Site network must run OSPF, DHCP relay, and MP-BGP.
Answer: C,D
NEW QUESTION # 86
A customer implements RBAC on a Cisco APIC using a Windows RADIUS server that is configured with network control policies. The APIC is as follows:
Tenant = TenantX
Security Domain = Tenantx-SD
User = X
The customer requires User X to have access to TenantX only, without any extra privilege in the Cisco ACI fabric domain. Which Cisco AV pair must be implemented on the RADIUS server to meet these requirement?
- A. shell:domains = TenantX-SD/fabric-admin/,common//read-all
- B. shell:domains = TenantX-SD/tenant-admin/,common//read-all
- C. shell:domains = TenantX-SD/tenant-ext-admin/,common//read-all
- D. shell:domains = TenantX-SD/tenant-admin
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/Security_config/b_Cisco_APIC_Security_Guide/b_Cisco_APIC_Security_Guide_chapter_0100.html
NEW QUESTION # 87
Which new construct must a user create when configuring in-band management?
- A. management contract
- B. management tenant
- C. VLAN pool
- D. bridge domain
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/ b_KB_Configuring_Static_Management_Access.html
NEW QUESTION # 88
Refer to the exhibit.
Refer to the exhibit, An engineer is deploying a Cisco ACI environment but experiences a STP loop between switch1 and switch2. Which configuration step is needed to break the STP loop?
- A. Enable BPDU filter under the STP interface policy on the Interfaces lacing the MST switches.
- B. Configure a Layer 2 external bridged network on the interfaces facing the MST switches.
- C. Enable the native VLAN on the interfaces facing the MST switches using static pons in a dedicated EPG.
- D. Configure the STP instance to VLAN mapping under the switch STP policy.
Answer: C
NEW QUESTION # 89
An ACI administrator notices a change in the behavior of the fabric. Which action must be taken to determine if a human intervention introduced the change?
- A. Inspect event records in the APIC UI to see all actions performed by users.
- B. Inspect the output of show command history in the APIC CLI.
- C. Inspect audit logs in the APIC UI to see all user events.
- D. Inspect /var/log/audit_messages on the APIC to see a record of all user actions.
Answer: C
NEW QUESTION # 90
An ACI engineer is implementing a Layer 3 out inside the Cisco ACI fabric that must meet these requirements:
The data center core switch must be connected to one of the leaf switches with a single 1G link.
The routes must be exchanged using a link-state routing protocol that supports hierarchical network design.
The data center core switch interface must be using 802.1Q tagging, and each vlan will be configured with a dedicated IP address.
Which set of steps accomplishes these goals?
- A. Set up the ElGRP Protocol policy with the selected Autonomous System number. Set up the Routed External Network object ana Node Profile, selecting ElGRP Create the Switch profile, selecting Port-channel and the appropriate interfaces Create the default network and associate it with the Routed Outside object.
- B. Configure the OSPF Protocol policy with an area of 0.
Create Routed Outside object and Node Profile, selecting OSPF as the routing protocol. Build the Interface profile, selecting Routed Sub-interface and the appropriate VLAN. Configure the External Network object with a network of 0.0.0.0/0. - C. Set up the ElGRP Protocol policy with the selected Autonomous System number. Create the Routed Outside object and Node Profile selecting ElGRP Configure the Interface profile selecting Routed Interface and the appropriate interfaces. Create the External Network object with a network of 0.0.0.0/0.
- D. Set up the BGP Protocol policy with the Autonomous System number of 0.
Configure an interface policy and an External Bridged Domain.
Create an External Bridged Network using the configured VLAN pool.
Build the Leaf profile, selecting Routed sub-interface and the appropriate VLAN.
Answer: B
NEW QUESTION # 91
An engineer must implement management policy and data plane separation in the Cisco ACI fabric. Which ACI object must be created in Cisco APIC to accomplish this goal?
- A. Bridge domain
- B. Tenant
- C. Contract
- D. Application profile
Answer: A
NEW QUESTION # 92
An engineer configured Layer 2 extension from the ACI fabric and changed the Layer 2 unknown unicast policy from Flood to Hardware Proxy. How does this change affect the flooding of the L2 unknown unicast traffic?
- A. It is forwarded to one of the APICs to perform as a proxy.
- B. It is forwarded to one of the spines to perform as a spine proxy.
- C. It is dropped by the leaf when the destination endpoint is not present in the endpoint table.
- D. It is flooded within the whole fabric.
Answer: B
NEW QUESTION # 93
......
Cisco 300-620 certification exam is designed to test the proficiency of IT professionals in implementing Cisco Application Centric Infrastructure (ACI). Implementing Cisco Application Centric Infrastructure certification exam is part of the CCNP Data Center certification track and is intended for individuals who want to demonstrate their skills in deploying, configuring, and managing Cisco ACI solutions.
300-620 Premium Exam Engine - Download Free PDF Questions: https://www.test4sure.com/300-620-pass4sure-vce.html
Instant Download 300-620 Free Updated Test Dumps: https://drive.google.com/open?id=1VCljblrosDL7zKh756Ust1S6kt6AvY6I