NSE7_PBC-6.4 Free Update With 100% Exam Passing Guarantee [2021]
[Jul-2021] Verified Fortinet Exam Dumps with NSE7_PBC-6.4 Exam Study Guide
NEW QUESTION 12
Which two statements about Amazon Web Services (AWS) networking are correct? (Choose two.)
- A. Multicast traffic is not allowed.
- B. AWS DNS reserves the first host IP address of each subnet.
- C. 802.1q VLAN tags are allowed inside the same virtual private cloud.
- D. Proxy ARP entries are disregarded.
Answer: A,B
NEW QUESTION 13
You have previously deployed an Amazon Web Services (AWS) transit virtual private cloud (VPC) with a pair of FortiGate firewalls (VM04 / c4.xlarge) as your security perimeter. You are beginning to see high CPU usage on the FortiGate instances.
Which action will fix this issue?
- A. Convert the c4.xlarge instances to m4.xlarge instances.
- B. Convert the transit VPC firewalls into an auto-scaling group and launch additional EC2 instances in that group.
- C. Migrate the transit VPNs to new and larger instances (VM08 / c4.2xlarge).
- D. Convert from IPsec tunnels to generic routing encapsulation (GRE) tunnels, for the VPC peering connections.
Answer: B
NEW QUESTION 14
Refer to the exhibit.
The exhibit shows a topology where multiple connections from clients to the same FortiGate-VM instance, regardless of the protocol being used, are required.
Which two statements are correct? (Choose two.)
- A. The design shows an active-active FortiGate-VM architecture.
- B. The Cloud Load Balancer Session Affinity setting should be changed to CLIENT_IP.
- C. The Cloud Load Balancer Session Affinity setting should use the default value.
- D. The design shows an active-passive FortiGate-VM architecture.
Answer: A,B
NEW QUESTION 15
Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)
- A. A multiple VPC deployment utilizing a transit VPC topology
- B. A single VPC deployment with multiple subnets and a NAT gateway
- C. A multiple VPC deployment utilizing a transit gateway
- D. A single VPC deployment with multiple subnets
Answer: A,D
NEW QUESTION 16
Refer to the exhibit.
Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)
- A. SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT- 0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01
- B. 172.29.32.71 is set as a next hop IP for all routes under FortigateUDR-01
- C. The network interface of the active unit moves to itself
- D. SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01
Answer: A,B
NEW QUESTION 17
Refer to the exhibit.
A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Web servers to the Internet. The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface.
What are two possible reasons for this behavior? (Choose two.)
- A. AWS source and destination checks are enabled on the FortiGate interfaces.
- B. The Internet gateway (IGW) is not added to VPC (virtual private cloud).
- C. The web servers are not configured with the default gateway.
- D. AWS security groups may be blocking the traffic.
Answer: C,D
NEW QUESTION 18
A company deployed a FortiGate-VM with an on-demand license using Amazon Web Services (AWS) Market Place Cloud Formation template. After deployment, the administrator cannot remember the default admin password.
What is the default admin password for the FortiGate-VM instance?
- A. The instance-ID value
- B. <blank>
- C. The admin password cannot be recovered and the customer needs to deploy the FortiGate-VM again.
- D. admin
Answer: A
NEW QUESTION 19
Which two statements about the Amazon Cloud Services (AWS) network access control lists (ACLs) are true?
(Choose two.)
- A. Network ACLs support allow rules and deny rules.
- B. Network ACLs are stateful, and inbound and outbound rules are used for traffic filtering.
- C. Network ACLs must be manually applied to virtual network interfaces.
- D. Network ACLs are stateless, and inbound and outbound rules are used for traffic filtering.
Answer: A,D
Explanation:
Explanation/Reference: https://docs.aws.amazon.com/vpc/latest/userguide/vpc-network-acls.html
NEW QUESTION 20
Which statement about FortiSandbox in Amazon Web Services (AWS) is true?
- A. FortiSandbox in AWS uses Windows virtual machines (VMs) to inspect files.
- B. In AWS, virtual machines (VMs) that inspect files do not have to be reset after inspecting a file.
- C. In AWS, virtual machines (VMs) that inspect files are constantly up and running.
- D. FortiSandbox in AWS can have a maximum of eight virtual machines (VMs) that inspect files.
Answer: C
NEW QUESTION 21
Refer to the exhibit.
You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On-demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.
What caused the validation process to fail?
- A. You selected the incorrect resource group.
- B. You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.
- C. You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.
- D. You selected the Bring Your Own License (BYOL) licensing mode.
Answer: A
NEW QUESTION 22 
Refer to the exhibit. Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)
- A. Use ExpressRoute to interconnect the hub VNets and spoke VNets.
- B. Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.
- C. Configure VNet peering between the hub and spokes.
- D. Configure VNet peering between the spokes only.
Answer: A,C
NEW QUESTION 23
When configuring the FortiCASB policy, which three configuration options are available? (Choose three.)
- A. Data loss prevention policies
- B. Antivirus policies
- C. Compliance policies
- D. Threat protection policies
- E. Intrusion prevention policies
Answer: A,C,D
NEW QUESTION 24
An organization deploys a FortiGate-VM (VM04 / c4.xlarge) in Amazon Web Services (AWS) and configures two elastic network interfaces (ENIs). Now, the same organization wants to add additional ENIs to support different workloads in their environment.
Which action can you take to accomplish this?
- A. Create the ENI and attach it to FortiGate.
- B. None, you cannot create and add additional ENIs to an existing FortiGate-VM.
- C. Create the ENI, attach it to FortiGate, and then restart FortiGate.
- D. Create the ENI, shut down FortiGate, attach the ENI to FortiGate, and then start FortiGate.
Answer: D
NEW QUESTION 25
Refer to the exhibit.
Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)
- A. Use ExpressRoute to interconnect the hub VNets and spoke VNets.
- B. Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.
- C. Configure VNet peering between the hub and spokes.
- D. Configure VNet peering between the spokes only.
Answer: A,C
NEW QUESTION 26
An organization deployed a FortiGate-VM in the Google Cloud Platform and initially configured it with two vNICs. Now, the same organization wants to add additional vNICs to this existing FortiGate-VM to support different workloads in their environment.
How can they do this?
- A. They can use the Compute Engine API Explorer.
- B. They cannot create and add additional vNICs to an existing FortiGate-VM.
- C. They can create additional vNICs using the Cloud Shell.
- D. They can create additional vNICs in the UI console.
Answer: A
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/62d32ecf-687f-11ea-
9384-00505692583a/FortiOS-6.4-GCP_Cookbook.pdf
NEW QUESTION 27
Which three properties are configurable Microsoft Azure network security group rule settings? (Choose three.)
- A. Destination port ranges
- B. Source and destination IP ranges
- C. Source port ranges
- D. Action
- E. Sequence number
Answer: A,C,D
Explanation:
Explanation/Reference: https://docs.microsoft.com/en-us/azure/virtual-network/network-security-groups-overview
NEW QUESTION 28
Refer to the exhibit.
You are configuring an active-passive FortiGate clustering protocol (FGCP) HA configuration in a single availability zone in Amazon Web Services (AWS), using a cloud formation template.
After deploying the template, you notice that the AWS console has IP information listed in the FortiGate VM firewalls in the HA configuration. However, within the configuration of FortiOS, you notice that port1 is using an IP of 10.0.0.13, and port2 is using an IP of 10.0.1.13.
What should you do to correct this issue?
- A. Configure FortiOS to use static IP addresses with the IP addresses reflected in the ENI primary IP address configuration (as per the exhibit).
- B. Nothing, in AWS cloud, it is normal for a FortiGate ENI primary IP address to be different than the FortiOS IP address configuration.
- C. Delete the deployment and start again. You have in put the wrong parameters during the cloud formation template deployment.
- D. Configure FortiOS to use DHCP so that it will get the correct IP addresses on the ports.
Answer: D
NEW QUESTION 29
......
Authentic Best resources for NSE7_PBC-6.4 Online Practice Exam: https://www.test4sure.com/NSE7_PBC-6.4-pass4sure-vce.html
NSE7_PBC-6.4 Test Engine Practice Exam: https://drive.google.com/open?id=1XdoY126BmKf6KmyHaN8GgN4AKmQVTRdg