Updated PDF (New 2021) Actual Network Appliance NS0-161 Exam Questions
Verified NS0-161 Exam Dumps PDF [2021] Access using Test4Sure
What is the duration, language, and format of Network Appliance NS0-161: NetApp Certified Data Administrator ONTAP Exam
- There is a time limit of 100 minutes for the exam
- To take the Netapp certification NS0-161 exam, you have at least 6-12 months of field experience administering NetApp data management solutions in the cloud. The NetApp Certified Data Administrator ONTAP NS0-161 exam test includes 60 test questions, with an allotted time of 1-1/2 hours to complete. In countries where English is not the native language, candidates for whom English is not their first language will be granted a 30-minute extension to the allotted examination completion time.
- This exam is offered in only English
- In countries where English is not the native language, candidates for whom English is not their first language will be granted a 30-minute extension to the allotted examination completion time.
- This exam consists of 60 questions
How to Prepare for Network Appliance NS0-161: NetApp Certified Data Administrator ONTAP Exam
Preparation Guide for Network Appliance NS0-161: NetApp Certified Data Administrator ONTAP Exam
Introduction
NetApp had its start way back in 1992 when accessing the internet meant dialing up and hearing beeps, crackles, and beeps. By tech industry norms we have seen it all and we have not only survived, but weâÂÂve also thrived. We held our attention on one issue, namely the details. The controlled, collected, analyzed, secured, and transferred infrastructure continues to be enhanced. This NS0-161 exam test Certification helps a candidate to validates his skills in cloud administration.
They have succeeded in changing and rising with various cycles of transformation across history. We ran to those waves and ran like Kelly Slater. Our approach still allows our consumers to take full advantage of the opportunities of emerging technology, from the expansion of the Internet to the support for big businesses in the vertical markets, and the implementation of new systems. And we are based today in collaboration with the world’s top vendors on unlocking the latest in the cloud. Of course, even more tides of transition will fill the future. We will run to them, adapt, and grow our experience, and make it easier for others to appreciate their journey.
In this guide, we will cover the NS0-161 practice exams, Expert Certified professional salary, and all aspects of the NS0-161 practice test.
Network Appliance NS0-161 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
NEW QUESTION 15
How many global namespaces are there in a 4-node ONTAP cluster that has a single SVM?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 16
Click the Exhibit button.
Using ONTAP 9.5, you are operating with data protection across three sites. The cluster_A and cluster_B systems require synchronous replication. The SVMs on cluster_A also require asynchronous SVM-DR replication to a third site. All replication between all sites must also replicate the SVM configuration.
Referring to the exhibit, which replication technology is supported between cluster_A and cluster_B?
- A. MetroCluster IP
- B. Foreign LUN Import
- C. NetApp Data Availability Services
- D. Snap Mirror Synchronous
Answer: D
NEW QUESTION 17
Click the Exhibit button.
You want to add shelves to an AFF A300 HA pair that currently has six DS224C shelves already connected.
You are using the onboard SAS port only, and you want to keep the multipath high availability (MPHA) configuration.
Referring to the exhibit, what is the maximum number of additional shelves allowed to be added in this configuration? (Choose the best answer.)
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 18
You have an ONTAP 9.7 cluster. You increased the size of the volume to 3 TB, but the IOPs did not increase as expected.
What are the expected IOPS for the volume after the change?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 19
What are the two capabilities of an SVM administrator? (Choose two.)
- A. to create LUNs
- B. to delete snapshot copies
- C. to create new users
- D. to delegate an aggregate to the SVM
Answer: A,B
NEW QUESTION 20
Which two components are required for committing data to a WORM volume? (Choose two.)
- A. You must license SnapLock.
- B. You must create a SnapLock volume.
- C. You must create a SnapLock Aggregate.
- D. You must create a SnapLock SVM.
Answer: B,C
NEW QUESTION 21
In which version of ONTAP did the NVMe protocol become available for SAN environments?
- A. 9.2
- B. 9.5
- C. 9.4
- D. 9.3
Answer: C
NEW QUESTION 22
Click the Exhibit button.
cluster1::> volume create -vserver vsl -volume voll -aggregate aggr1 -encrypttrue
Which statement regarding the command shown in the exhibit is true?
- A. The volume will be created and protected using an external Key Management Server.
- B. The volume will be created and protected for Snaplock Enterprise compliance.
- C. The volume will be created and protected on an aggregate using NetApp Storage Encryption (NSE) disks.
- D. The volume will be created and protected using NetApp Volume Encryption (NVE).
Answer: A
NEW QUESTION 23
Click the Exhibit button.
A customer has an issue with performance on an NVMe solution. The SVM is using all four ports shown in the exhibit.
In this scenario, how would the customer improve the host performance? (Choose the best answer.)
- A. Change the SFP+ in the controllers from 32 Gbps to 64 Gbps.
- B. Move some of the network interfaces from 2a to 2c and 2d.
- C. Remove support of the FC protocol and only use NVMe.
- D. Move all of the network interfaces to port 2a.
Answer: A
NEW QUESTION 24
A customer installed an ONTAP cluster. The customer wants to provide data access to host computers and end users.
Which three tasks are required? (Choose three.)
- A. Create an IPspace.
- B. Create a LIF.
- C. Create a volume.
- D. Create an SVM.
- E. Create a Quality of Service (QoS) policy.
Answer: B,C,D
NEW QUESTION 25
You are planning to present storage to your servers from your AFF system using the FC protocol. You have a pair of Fc switches to ensure connectivity and you have decided to use WWPN zoning.
Referring to the exhibit, which two WWPNs do you use for your configuration? (Choose two.)
- A. 0d WWPN
- B. fc-2 WWPN
- C. fc-1 WWPN
- D. 0c WWPN
Answer: B,C
NEW QUESTION 26
Click the Exhibit button.
You configured LACP between a 2-node AFF 220 system and two Ethernet switches using multichassis Ether- channel for redundancy. You sent the network connection diagram in the exhibit to your network team to cable and configure the switch. You noticed partial connectivity on the AFF A220 for the interface groups.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. ONTAP does not have a multichassis Ether-channel feature.
- B. The network team forgot to verify the port channel members.
- C. 10 GbE ports are not supported with the AFF A220.
- D. The storage cabling to the switches is incorrect.
Answer: A,D
NEW QUESTION 27
Click the Exhibit button.
Referring to the exhibit, a customer is experiencing performance problems on an SVM supporting NVMe/ FC. You review the physical FC ports that are connected into the 32 Gbps switches for cluster tme-a700.
In this scenario, what is causing the performance problems? (Choose the best answer.)
- A. Port 2b has two many LIFs running across the physical port.
- B. Port 2a needs more network interfaces added to the physical port.
- C. Port 2a needs a 16 Gbps SFP+ installed.
- D. Port 2b has a 16 Gbps SFP+ installed.
Answer: B
NEW QUESTION 28
What are three firewall policies? (Choose three.)
- A. intercluster
- B. node
- C. data
- D. mgmt
- E. cluster
Answer: A,C,E
Explanation:
Explanation/Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID-
09329781-2E57-49E5-B052-EC4D6FEBB41B.html
NEW QUESTION 29
Click the Exhibit button.
You want to add shelves to an AFF A300 HA pair that currently has six DS224C shelves already connected.
You are using the onboard SAS port only, and you want to keep the multipath high availability (MPHA) configuration.
Referring to the exhibit, what is the maximum number of additional shelves allowed to be added in this configuration? (Choose the best answer.)
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 30
Which three steps are required to serve NFS exports from your ONTAP system? (Choose three.)
- A. You must have provisioned a volume to export.
- B. You must create an export policy rule.
- C. You must license NFS.
- D. You must create an SMB share.
- E. You must license CIFS.
Answer: A,B,C
NEW QUESTION 31
On FAS systems, FlexCache volumes are typically used for which type of workload?
- A. write-intensive NAS workloads
- B. read-intensive SAN workloads
- C. write-intensive SAN workloads
- D. read-intensive NAS workloads
Answer: D
NEW QUESTION 32
What are three types of shells that are used in ONTAP? (Choose three.)
- A. nodeshell
- B. systemshell
- C. bashshell
- D. powershell
- E. clustershell
Answer: A,B,E
NEW QUESTION 33
Node A has taken over Node
B. You solved the issue that caused the takeover and are now ready to resume normal operation.
After initiating the storage failover givebackcommand, how are the aggregates given back?
(Choose the best answer.)
- A. CFO aggregates are automatically given back, SFO aggregates must be manually given back.
- B. CFO aggregates and SFO aggregates are automatically given back.
- C. The root aggregate is automatically given back, CFO and SFO aggregates must be manually given back.
- D. SFO aggregates are automatically given back, CFO aggregates must be manually given back.
Answer: B
Explanation:
Explanation/Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-960%
2Fstorage__failover__giveback.html
NEW QUESTION 34
......
Try Best NS0-161 Exam Questions from Training Expert Test4Sure: https://www.test4sure.com/NS0-161-pass4sure-vce.html