HP HPE0-J68 Deluxe Study Guide with Online Test Engine
HPE0-J68 dumps review - Professional Quiz Study Materials
NEW QUESTION 60
A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD's configured with RAID5 7+1. They plan to add four more 3.84 TB SSD's.
What needs to be changed on the configuration once the new SSD's are installed?
- A. Adjust the cpg growth value to match amount of SSD's.
- B. Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.
- C. Change the cpg setsize to RAID5 5+1 and run tunesys.
- D. Change the availability level from cage to magazine.
Answer: C
NEW QUESTION 61
Match each HPE storage solution to its use case.
Answer:
Explanation:
NEW QUESTION 62
Which function is built into the HPE 3par OS and enable users to move data and workloads between array without impacting applications, users, or services?
- A. Peer motion
- B. Adaptive optimization
- C. Peer persistence
- D. Remote copy
Answer: C
NEW QUESTION 63
You are designing an HPE MSA iSCSI for a customer.
Which components are typically part of the solution? (Choose two.)
- A. All-inclusive Multi-system software
- B. Service Processor
- C. Drives
- D. Switch zones
- E. SFPs
Answer: C,E
NEW QUESTION 64
Which HPE 3Par feature improves CPU utilization ,reduces latency and improve IOPS ?
- A. Express Indexing
- B. Persistent Cache
- C. Zero Detect
- D. Express Writes
Answer: D
NEW QUESTION 65
What performance benefit is provided by using the HPE StoreVirtual DSM for Microsoft MPIO instead of the standard MPIO?
- A. The HPE DSM increases availability and reduces latency and throughput.
- B. The storage system, which holds a copy of the requested data, services the read I/Os.
- C. The storage system, which receives a copy of the data, does not service the write I/O.
- D. The iSCSI connections are blocked to non-critical nodes in the cluster by default.
Answer: B
NEW QUESTION 66
Which file protocols are commonly used in HPE StoreOnce environments? (Choose two.)
- A. ZFS
- B. NTFS
- C. NFS
- D. VFS
- E. CIFS
Answer: C,E
NEW QUESTION 67
A customer has an existing configuration consisting of first class and nearline SAS drive in an 8000 SFF enclosure. They add two SFF 8000enclosure that are fully populated with nearline drives to an existing HPE 3Par storeserv 8400 array. What should the customer do to optimize their storage configuration?
- A. Create new CPG for the newly installed drivers
- B. Run tunesys and on the array (275)
- C. Defrag the CPG and run align drive on their system
- D. Enable space reclamation
Answer: B
NEW QUESTION 68
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?
- A. N_PORT
- B. E_PORT (Correct)
- C. FL_PORT (WRONG)
- D. F_PORT
Answer: B
NEW QUESTION 69
Which software feature should an HPE 3PAR Storeserv 8000 customer use to optimize data protection and recovery, Including rapid online recovery for his VMware environment?(select two)
- A. HPE 3PAR Security software suite
- B. HPE 3PAR File persona Software suite
- C. HPE 3PAR Remote copy software
- D. HPE StoreOnce recovery manager central for VMware
- E. HPE 3PAR Virtual Copy software
Answer: D,E
NEW QUESTION 70
A customer has mission-critical applications that intermittently experience heavy disk I/O. The storage speed has the most impact on the application's performance. The customer does not want to dedicate SSD disks to these applications because additional performance is only needed periodically, and moving the volumes between tiers takes too long.
Which HPE StoreVirtual VSA feature can address this customer's challenge?
- A. Space Reclamation
- B. Thin Provisioning
- C. Storage virtualization
- D. Adaptive Optimization
Answer: D
NEW QUESTION 71
A customer has a 3PAR storeserv with FC and SSD drives who would like to improve the performance for random reads. Which 3PAR Storeserve feature would provide better read performance?
- A. Deduplication
- B. Express Layout
- C. Adaptive Flash Cache
- D. Smart Cache
Answer: C
NEW QUESTION 72
A customer is planning to replace their existing LTO-6 tape library with a new HPE StoreEver MSL2024 tape library. They want to reuse their existing LTO-6 tape cartridges for reads and writes.
What is the latest tape drive technology that will provide backward compatibility?
- A. LTO7
- B. LTO5
- C. LTO8
- D. LTO6
Answer: A
NEW QUESTION 73
You are installing an HPE 3PAR StoreServ solution and need to integrate the array with the 3rd party monitoring application customer is using.
Which technology can be configured at 3PAR to support forwarding events from the array to the customer's monitoring application?
- A. IPMI
- B. NTP
- C. SNMPv3
- D. DMI
Answer: C
NEW QUESTION 74
A customer environment includes:
10 DL380 Gen8 servers in a VMware Cluster
2 MSA storage arrays
2 8GB b-series fibre channel switches
The customer needs to replace their environment because it is end of life. They have limited budget. The customer is primarily concerned with management because they have limited IT staff, and they want to move away from fibre channel.
Which HPE Storage should you recommend?
- A. HPE Primera
- B. HPE StoreOnce
- C. HPE XP8
- D. HPE Nimble dHCI
Answer: A
NEW QUESTION 75
A customer need a new storage system for visual desktop infrastructure environment to reduce the time required to provision new desktop. Which HPE solution should you recommended to fulfill this customers requirements?
- A. Snapclones on HPE MSA 2040
- B. SmartClone on HPE store virtual VSA(54)
- C. Storage pool on HPE store Easy
- D. Virtual Copy on HPE 3Par storeServ
Answer: B
NEW QUESTION 76
......
Exam Questions Answers Braindumps HPE0-J68 Exam Dumps PDF Questions: https://www.test4sure.com/HPE0-J68-pass4sure-vce.html
HPE0-J68 Test Prep Training Practice Exam Questions Practice Tests: https://drive.google.com/open?id=1R5JigW3dlHKGBUcamprkGn7yEyADQE8R