[Q80-Q95] 100% Guaranteed Results HPE0-J68 Unlimited 178 Questions [2021]

100% Guaranteed Results HPE0-J68 Unlimited 178 Questions [2021]

HPE0-J68 Dumps PDF - Want To Pass HPE0-J68 Fast

NEW QUESTION 80
An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types.
What could be used to resolve the issue?

A. Adaptive Optimization using tier 1
B. Dynamic Optimization using tier 1
C. Dynamic Optimization using tier 2
D. Dynamic Optimization between tier 0 and tier 1

Answer: D

Explanation:
During a peak period when performance is critical, the VV can be optimized by moving to faster disk and the RAID level.

NEW QUESTION 81
You are adding a new host for an HPE 3PAR StoreServ proof-of-concept .In addition to the host name ,What is the minimum information that is required to create a host profile?

A. Host set
B. Host Persona
C. Host WWN
D. Host MAC

Answer: C

NEW QUESTION 82
A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you confirm the storage array will be supported in the existing environment?

A. Design an array with older version of the firmware to ensure compatibility
B. Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware
C. Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility
D. Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility

Answer: C

NEW QUESTION 83
A customer has a Nimble HF40 and needs to create a support ticket.
Click the option in the InfoSight portal where the customer can perform this task.

Answer:

Explanation:

NEW QUESTION 84
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?

A. HPE 3PAR MPIO
B. HPE 3PAR Access Guard
C. HPE 3PAR Persistent Cache
D. HPE 3PAR Persistent Ports

Answer: D

NEW QUESTION 85
Which tool is used to configure an HPE MSA 2052?

A. InfoSight
B. CMC
C. SSMC
D. SMU

Answer: A

NEW QUESTION 86
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICs are included in the configuration. You designed an Intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statement is correct when discussing the IRF limits for this configuration?

A. A maximum of two switches can be used in an IRF stack when connecting storage.
B. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
C. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.
D. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.

Answer: B

NEW QUESTION 87
A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports.
Which feature will address the customer's concern?

A. Persistent Checksum
B. Peer Persistence
C. Persistent Ports
D. Persistent Cache

Answer: A

NEW QUESTION 88
Which protocols are currently used in the front end by HPE 3PAR StoreServ systems? (Choose two.)

A. Infiniband
B. FC
C. iSCSI
D. NVMe
E. SAS

Answer: B,C

NEW QUESTION 89
You have proposed that a customer replace their legacy SAN switches with new ?-Series switches. They are concerned about the management of all the devices, so you have included SANnav in the proposal.
What are the benefits of SANnav that you should emphasize to this customer? (Choose two.)

A. It provides fine-grain visibility into Storage Fabrics (FC + Ethernet)
B. It runs in a browser
C. It provides a global View
D. It runs in a dedicated JVM
E. It offers automated SPOCK validation

Answer: B,C

NEW QUESTION 90
You have just completed a performance analysis of an HPE 3PAR StoreServ 8400 disk array with different tiers at a customer's site. After reviewing the performance metrics, you determine that they should install a new tier of SSD drives.
Which actions should you recommend they take to fully optimize the array? (Choose two.)

A. Configure dedicated drives to enable Adaptive Flash Cache.
B. Rebalance all flash drives between nodes 0 and 2.
C. Configure scheduled tunesys tasks.
D. Configure Adaptive Optimization.
E. Configure Adaptive Flash Cache.

Answer: C,D

NEW QUESTION 91
Which technology is used in a B-series SAN switch to prevent communicate between unauthorized device?

A. IVR
B. Port isolation
C. VSAN
D. Zoning

Answer: B

NEW QUESTION 92
What is the purpose of WWN in FC SAN? (Choose two.)

A. Identification of zone members
B. Identification of entities denied access to a volume
C. Forward translation of DNS entries
D. Load balanced frame delivery
E. Identification of entities via Storage Name Server (SNS)

Answer: C,E

NEW QUESTION 93
What owns the physical drives in an HPE 3PAR StoreServ Express Layout?

A. a chunklet
B. a logical disk
C. a single node
D. a node pair

Answer: D

NEW QUESTION 94
You are handing over the installed array to customer. The customer wants to review the amount of HDDs and SSDs in the system.
Click the relevant menu option where the front panel of the head shelf can be visualized.