Latest Cisco 010-151 First Attempt, Exam real Dumps Updated [Oct-2021]
Get the superior quality 010-151 Dumps Questions from Test4Sure. Nobody can stop you from getting to your dreams now. Your bright future is just a click away!
NEW QUESTION 32
Drag the password recovery procedures on a Cisco NX-OS switch from the left to the right and place them in order.
Select and Place:
Answer:
Explanation:
NEW QUESTION 33
Which group of UCS Virtual Interface Cards is exclusively designed for Cisco UCS C-Series Rack Server?
- A. VIC 1440, VIC 1340, VIC 1388, VIC 1280, M81KR VIC
- B. M81KR VIC, VIC 1497, VIC 1340, VIC 1387, VIC 1240
- C. VIC 1455, VIC 1497, VIC 1385, VIC 1387, VIC 1225
- D. VIC 1455, VIC 1480, VIC 1385, VIC 1340, VIC 1280
Answer: C
NEW QUESTION 34
Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server? (Choose three.)
- A. Check the CPU sockets for bent pins.
- B. Check the back of the blade to ensure that there is no damage to the connection that goes into chassis.
- C. Decommission and acknowledge the blade.
- D. Move the blade to another slot in the chassis.
- E. Reseat the blade in the same slot in the chassis.
- F. Reseat the memory DIMMs.
Answer: B,D,E
NEW QUESTION 35
Which two virtualization technologies are used in a modern data center design? (Choose two.)
- A. Storage virtualization
- B. Application virtualization
- C. Server virtualization
- D. Platform virtualization
- E. Cloud virtualization
Answer: C,D
NEW QUESTION 36
How do you find the serial number of a Cisco UCS 5108 Blade Server chassis?
- A. Use the Cisco UCS Admin.
- B. Use the Cisco UCS Application.
- C. Use the Cisco UCS Manager.
- D. Use the Cisco UCS Assistant.
Answer: C
NEW QUESTION 37
What is the maximum number of supervisor modules that the Cisco MDS 9710 Switch supports?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: E
NEW QUESTION 38
Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #
- A. Ctrl-C
- B. end
- C. exit
- D. quit
- E. Ctrl-L
Answer: B
NEW QUESTION 39
Refer to the exhibit.
Where is the best place to see the power supply status of the blade server enclosure?
- A. C - Chassis1 - Servers
- B. B - Chassis 1 - PSUs
- C. D - Rack-Mounts - Servers
- D. A - Chassis 1
- E. E - Fabric Interconnects A - PSUs
Answer: B
NEW QUESTION 40
On which three devices can the Host Upgrade Utility be performed? (Choose three.)
- A. C240
- B. B210
- C. C230
- D. C210
- E. C420
- F. B230
- G. B460
Answer: A,D,E
NEW QUESTION 41
Which supervisor module is supported by a Cisco Nexus 7700 Series Switch?
- A. third-generation supervisor enhanced module (Sup3E)
- B. first-generation supervisor module
- C. second-generation supervisor enhanced module (Sup2E)
- D. second-generation supervisor module (Sup2)
Answer: C
NEW QUESTION 42
Which two remote file system methods are used in the training material to transfer firmware to the Fabric Interconnect? (Choose two.)
- A. RSH
- B. TFTP
- C. FTP
- D. FTPS
Answer: B,C
NEW QUESTION 43
Which NX-OS command is used to display the boot variable configuration?
- A. show config
- B. open boot
- C. display boot
- D. show boot
Answer: D
NEW QUESTION 44
A company wants to build a data center infrastructure which can provide up to 99.982% uptime availability per year. Which ANSI/TIA-942 data center tier meets the requirement?
- A. Redundant-capacity component site infrastructure
- B. Redundant-distribution site infrastructure
- C. Basic site infrastructure
- D. Concurrently maintainable site infrastructure
Answer: D
Explanation:
Explanation/Reference: https://www.doc.ic.ac.uk/~jgiceva/teaching/ssc18-cloud.pdf page 16
NEW QUESTION 45
What is the correct path to verify the Overall Status of Chassis 1 | Server 3?
- A. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- B. Servers Tab > Chassis > Server 3 General tab
- C. Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- D. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
- E. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
- F. Status Tab > Chassis > Chassis 1 > Servers > Server 3
Answer: A
NEW QUESTION 46
Refer to the exhibit.
Which item does F represent?
- A. HDD 1
- B. CMOS Battery
- C. TFP Module
- D. CPU 2
- E. SuperCap Module
Answer: D
NEW QUESTION 47
......
Cisco Practice Test Engine with 010-151 Questions: https://drive.google.com/open?id=1XGpZ1N89GFt7bgj6VcW-Qv1vOjUyfzXw
Guaranteed Success with Valid Cisco 010-151 Dumps: https://www.test4sure.com/010-151-pass4sure-vce.html