Unique Top-selling 010-151 Exams - New 2021 Cisco Pratice Exam
CCT Data Center Dumps 010-151 Exam for Full Questions - Exam Study Guide
NEW QUESTION 36
Which three statements about powering down a Cisco UCS C-Series Rack-Mount Server to perform maintenance or replacement are true? (Choose three.)
- A. Only an emergency shutdown can be performed using the power button on the server front panel.
- B. Graceful shutdown: Press and release the power button. The operating system performs a graceful shutdown, and the server goes to standby mode, which is indicated by an amber power status LED.
- C. The Cisco UCS C-Series Rack-Mount Server has only one power mode.
- D. Standby power mode: Power is supplied only to the service processor and the cooling fans, and it is safe to power off the server from this mode.
- E. Power status LED. Green indicates that the server is in main power mode and can be safely powered off.
- F. Disconnect the power cords from the power supplies in your server to completely power off the server.
Answer: B,D,F
NEW QUESTION 37
Refer to the exhibit.
Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?
- A. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
- B. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.
- C. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
- D. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.
Answer: C
NEW QUESTION 38
Which two commands allow you to view the state of high availability between the two clustered Fabric Interconnects? (Choose two.)
- A. show cluster extended-state
- B. show cluster HA status
- C. show cluster state extended
- D. show cluster state
Answer: A,D
NEW QUESTION 39
Which two transceivers can support 100 Gigabit Ethernet? (Choose two.)
- A. SFP-DD
- B. QSFP28
- C. QSFP+
- D. SFP+
- E. SFP28
Answer: B,C
NEW QUESTION 40
Refer to the exhibit.
This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool.
Which types of Cisco UCS servers and Intel Xeon processors do these tools support?
- A. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Series processors
- B. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2600 Series processors
- C. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2400 Series processors
- D. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Series processors
Answer: A
NEW QUESTION 41
After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)
- A. Reseat the DIMMs, CPU, and PCI cards.
- B. Reseat the mezzanine card connector.
- C. Check for loose HDD cables.
- D. Verify that power supplies are receiving power.
- E. Verify the power source to the equipment.
- F. Check the CPU sockets for bent pins.
G: Check the Cisco IMC for fan faults.
Answer: A,D,E,F
NEW QUESTION 42
Which type of connection across the network does a SAN allow for multiple servers to access an unlimited amount of storage devices?
- A. any-to-any
- B. any-to-many
- C. one-to-one
- D. many-to-any
- E. one-to-any
- F. any-to-one
Answer: A
NEW QUESTION 43
Which tool does a network administrator not need when installing hardware?
- A. needle-nose pliers
- B. cable wraps
- C. soldering iron with grounded tip
- D. wrench set
- E. PCMCIA memory
- F. cable tester
Answer: C
NEW QUESTION 44
When activating the firmware via UCSM which two firmware versions must be activated at the same time?
- A. UCS Manager and System
- B. UCS Manager and Kernel
- C. CIMC and Kernel
- D. System and Kernel
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/ Firmware-Mgmt/3-1/b_UCSM_GUI_Firmware_Management_Guide_3_1/ b_UCSM_GUI_Firmware_Management_Guide_3_1_chapter_011.html
NEW QUESTION 45
Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.)
- A. Virtual Fiber Channel Module
- B. Virtual Supervisor Module
- C. Virtual Ethernet Module
- D. Virtual Network Module
- E. Virtual Memory Controller Module
Answer: B,C
NEW QUESTION 46
Drag the password recovery procedures on a Cisco NX-OS switch from the left to the right and place them in order.
Answer:
Explanation:
NEW QUESTION 47
Refer to the exhibit.
Where is the best place to see whether the system is ready for a Fabric Interconnect failover?
- A. B - L1 Connection
- B. D - Access
- C. C - Part Details
- D. E - High Availability Details
- E. A - Overall Status operable
Answer: D
NEW QUESTION 48
During the auto-sync firmware upgrade process, what should be your initial input entered once the Fabric Interconnect boots up?
- A. auto-sync
- B. console
- C. upgrade firmware
- D. gui
Answer: B
NEW QUESTION 49
Which two provide connectivity to Fabric Extenders? (Choose two.)
- A. UCS B-Series Servers
- B. UCS 6400 series
- C. UCS E-Series Servers
- D. UCS S-Series Storage Servers
- E. UCS 6300 series
Answer: B,E
NEW QUESTION 50
Refer to the exhibit.
Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
- A. MDS 9710
- B. MDS 9506
- C. MDS 9513
- D. MDS 9509
Answer: A
NEW QUESTION 51
Refer to the exhibit.
Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?
- A. D - Capability Catalog
- B. A - Installed Firmware
- C. E - Management Extension
- D. C - Images
- E. B - Packages
Answer: E
NEW QUESTION 52
Which supervisor module is supported by a Cisco Nexus 7700 Series Switch?
- A. third-generation supervisor enhanced module (Sup3E)
- B. first-generation supervisor module
- C. second-generation supervisor enhanced module (Sup2E)
- D. second-generation supervisor module (Sup2)
Answer: C
NEW QUESTION 53 
Refer to the exhibit. Which item does 3 represent?
- A. Operate as 40-Gbps QSFP+ ports, and support QSA adapters to provide 1-Gbps to 10-Gbps operation
- B. Operate as 40-Gbps QSFP+ ports or as 4 x 10-Gbps SFP+ breakout ports
- C. Operate as port lane switch button, port lane LEDs, and Layer 1 and Layer 2 ports.
- D. Operate as dedicated 40-Gbps, QSFP+ uplink ports.
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/6300-install- guide/6300_Series_HIG/6300_Series_HIG_chapter_01.html
NEW QUESTION 54
Refer to the exhibit.
This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool. Which types of Cisco UCS servers and Intel Xeon processors do these tools support?
- A. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Series processors
- B. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5- 2600 Series processors
- C. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5- 2400 Series processors
- D. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Series processors
Answer: A
NEW QUESTION 55
......
Best way to practice test for Cisco 010-151: https://www.test4sure.com/010-151-pass4sure-vce.html
010-151 Dump Ready - Exam Questions and Answers: https://drive.google.com/open?id=14BYYYTd9a4EkonWE0xfJmggT8AfqNrnn