Free H35-210_V2.5-ENU Exam Braindumps - New 2024 Huawei Pratice Exam
Practice Test for H35-210_V2.5-ENU Certification Real 2024 Mock Exam
NEW QUESTION # 102
Regarding super vlan, which of the following statements are correct?
- A. Sub VLAN uses Super VLAN together
- B. The main purpose of Super VLAN is to save IP addresses.
- C. Super VLAN corresponds to a routing interface
- D. Super VLAN aggregates multiple Sub VLANs
Answer: A,B,C,D
NEW QUESTION # 103
Configure ADSL profile parameters in UA5000, what measures can improve line stability?
- A. Turn off the dynamic online adaptation function
- B. Turn on the grid delete coding switch
- C. Improve noise tolerance
- D. The channel mode is selected as fast
Answer: B,C
NEW QUESTION # 104
Is the following description correct? Administrators can maintain and manage UA5000 devices through out-of-band network management or in-band network management.
- A. True
- B. False
Answer: A
NEW QUESTION # 105
In the EPON network, what are the management protocols running between the OLT and the ONT?
- A. OMCI
- B. IGMP
- C. OAM
- D. SNMP
Answer: C
NEW QUESTION # 106
eSight supports the unified management of Huawei servers, storage, virtualization, switches, routers, VLANs, firewalls, PON, eLTE, unified communications, telepresence, video surveillance and other equipment, as well as application systems and equipment room facilities, and pre-integrated with HP, Management capabilities of third-party mainstream devices such as Cisco and H3C.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 107
Is the following description correct? When the MA5600T MG interface communicates with the MGC through the H.248 protocol, the H.248 protocol version configuration that the MG interface starts to negotiate may be inconsistent with the MGC side.
- A. True
- B. False
Answer: B
NEW QUESTION # 108
The monitoring of environmental quantities refers to the monitoring of some environmental factors that may cause equipment damage, malfunctions, etc .
Which of the following is not the subject of environmental monitoring?
- A. Humidity
- B. Temperature
- C. Board status
- D. Flooding
Answer: C
NEW QUESTION # 109
MA5680T configures GPON ONT templates through templates .
What templates need to be configured?
- A. GPON ONT capability template
- B. GPON ONT business template
- C. GPON ONT line template
- D. DBA template
Answer: B,C,D
NEW QUESTION # 110
In order to improve the bandwidth utilization rate, the upstream direction of the GPON system allows multiple ONU to send data at one time.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION # 111
By default, which of the following types is the queue scheduling mode on the OLT?
- A. CQ
- B. WRR
- C. PQ
- D. WFQ
Answer: C
NEW QUESTION # 112
Which control frame messages are defined by MPCP?
- A. REPORT
- B. GATE
- C. REGISTER
- D. REGISTER ACK
Answer: A,B,C,D
NEW QUESTION # 113
Is the following description correct? It is impossible for a route in the routing table to have a mask of0.0.0.0Routing items.
- A. True
- B. False
Answer: B
NEW QUESTION # 114
Which of the following access technologies has the fastest speed?
- A. SHDSL
- B. ADSL2+
- C. ADSL
- D. VDSL2
Answer: D
NEW QUESTION # 115
What is not included in the uplink mode of MA5616?
- A. GPON
- B. FE
- C. GE
- D. EPON
Answer: B
NEW QUESTION # 116
At a certain UA5000 site, due to resource constraints, the entire frame of ADSL users need to pass a VLAN upstream to the IP network.
At this time, why should the upstream VLAN in the IPM board be defined?
- A. mux vlan;
- B. super vlan
- C. standard vlan;
- D. smart vlan;
Answer: D
NEW QUESTION # 117
What is the allocation method of terminal identifiers stipulated in the H248 protocol?
- A. MG allocation when calling, MGC allocation when called
- B. Assigned by MG
- C. MG allocation when the terminal is the calling party, and MGC allocation when it is the called party
- D. Assigned by MGC
Answer: B
NEW QUESTION # 118
Is the following description correct? The key parameters of ODN network are attenuation, insertion loss, and return loss.
- A. True
- B. False
Answer: A
NEW QUESTION # 119
Which of the following modules is not a functional module of the MA5600 SCU main control board?
- A. Ethernet switch module
- B. Clock module
- C. Separator module
- D. CPU module
Answer: C
NEW QUESTION # 120
What kind of ICMP messages are used by the PING command?
- A. ICMP address mask request message
- B. ICMP Echo Reply packet
- C. ICMP timestamp request message
- D. ICMP Echo Request message
Answer: B,D
NEW QUESTION # 121
When the MA5600 SCU main control board starts to load, what is the status of the RUN light?
- A. 0.5 seconds on and 0.5 seconds off, flashing periodically
- B. 1 second on and 1 second off, periodic flashing
- C. 0.25 second on, 0.25 second off, periodic flashing
- D. 2 seconds on and 2 seconds off, periodic flashing
Answer: C
NEW QUESTION # 122
Regarding the deployment of WiFi, which of the following statements is reasonable? (Multiple choice)
- A. For hotel room scenarios, since WiFi roaming is basically not required between rooms, thin AP can be selected. At this time, the settings of each SSID must be different.
- B. For the hotel lobby scene or large conference room scene, WiFi roaming is required. Therefore, fat AP can be selected. The SSID settings of each AP in the roaming area can meet the requirements.
- C. For the hotel lobby scene or large conference room scene, WiFi roaming is required. Therefore, a thin AP can be selected. In this case, the SSID settings of each AP in the roaming area must be the same.
- D. For the hotel room scenario, since WiFi roaming is basically not required between rooms, a fat AP can be selected. In this case, the settings of each SSID can be the same.
Answer: C,D
NEW QUESTION # 123
What is the difference between alarm shielding and alarm suppression?
- A. There is no difference
- B. When setting the alarm shielding function, the network element will still report the alarm, but the network management will not receive it; when the alarm suppression is set, the network element will no longer report the alarm
- C. When the alarm shielding function is set, the network element will no longer report the alarm; when the alarm suppression is set, the network element will still report the alarm, but the network manager will not receive it.
- D. When setting the alarm shielding function, the network element does any processing.
Answer: B
NEW QUESTION # 124
When the MA5600T/MA5603T equipment needs to be maintained and managed locally, the baud rate setting of the maintenance terminal's HyperTerminal must be consistent with the serial port baud rate parameters of the MA5600T/MA5603T system .
What is the system default serial port baud rate?
- A. 9600bit/s
- B. 38400bit/s
- C. 115200bit/s
- D. 19200bit/s
Answer: A
NEW QUESTION # 125
......
Prepare For Realistic H35-210_V2.5-ENU Dumps PDF - 100% Passing Guarantee: https://www.test4sure.com/H35-210_V2.5-ENU-pass4sure-vce.html
Check the Available H35-210_V2.5-ENU Exam Dumps with 373 QA's: https://drive.google.com/open?id=1NZmJdc8YoEzBdo_85ifAbCZq3ONBP-A9